While appearing rudimental than most, a garage door is far more complicated than you think.
It’s made up of more than one intricate machine and would account for a homeowner to inspect its entirety from time to time.
As it happens, garage doors also require their owner’s attention in contrast to the notions that they work just fine without any tampering.
Given that these huge doors are subjected to intense pressure almost every day, it’s no brainer that they encounter problems from time to time.
It could be a door gap or the door going off-track; there’s a horde of things that could go wrong with one’s garage door if left unattended and unchecked for a long time.
As such, the fastest way to getting things done would be to leave the repairing to the professionals.
Nevertheless, others would want to take matters into their own hands.
That being said, this list aims to contribute to the repose of having to spend vast sums of money on repair on something one could plausibly independently.
With that, here are some helpful pointers on how to adjust garage door springs and cables that have come loose.
Open the garage door first.
Before setting off to work on the adjustment process, you will need to open the garage door fully first.
This will allow you to effectively release the tension of the springs.
You will need to open the door until it is fully up and hits the final mark.
If you have an automatic door, you can do this by unplugging the opener and disconnecting the garage door itself from the opener.
To disconnect it, pull the emergency cord down until the spring is locked in the open position.
This will allow you to manually open the door fully and release the tension that is put on the springs.
Secure the door in position.
Make use of some C-clamps below the bottom wheel.
You can also use the pair of locking pliers for each of the tracks that are underneath the bottom rollers.
This will assure you that the door will not fall while you are in the process of working.
Remove the spring hook.
The spring is usually attached to the track hanger through a large hook that is kept in place using a nut.
Once you have made sure that the spring is relieved of the tension, remove it from the track hanger.
Make use of the adjustable wrench to remove the nut that is located on the backside of the bracket.
After this, you will now be able to move the hook to either the lower or higher hole to be able to decrease or increase its tension.
Adjust the tension.
In order to adjust the tension, simply adjust the spring through one hole at a time.
Then, you will have to adjust both of the springs equally but make sure that the door is balanced.
After you have moved the hook to a new location, you need to replace the nut that is located at the back and make use of the wrench to be able to tighten the hook in its place.
If you want to decrease the tension and repair a door that is not closing all the way or is hard to shut or that might open very quickly, just hook the spring on a lower hole that is on the track hanger.
This will, in return, reduce the length of the spring as well as the tension on it.
In order to adjust the tension on a particular side and correct the door that does not close evenly, simply adjust the spring to the side where the gap is present.
You can lower the tension on that side by placing the spring onto a lower hole that is located on the hanger of the track.
Call a garage door repair company.
To ensure that the project on how to adjust garage door springs and cables is successful, call a garage door repair company.
With that said, call us! We specialize in all things concerning your garage door and cables.
As such, contact us to know how we can help!